Whatever idea you have in your head for your building, you can shape it with Rockpanel facade boards. Tell the story behind your architecture directly on the surface, with the facade. Transform your building into an eye-catching feature with organically flowing forms.
Note: Rockpanel does not recommend bending boards on an aluminium sub-frame. It is the responsibility of the structural engineer to decide whether it can be tension-free with a steel sub-frame.
| Panel thickness (mm) | 8 | 9 |
| Panel dimensions (mm, arch) | 3050 | 3050 |
| Radius R minimal (mm) | 2500 | 3600 |
| Angle α | 69.9° | 48.54° |
| Chord (mm) | 2864 | 2959 |
| Level (mm) | 451 | 318 |
| Common ground c.t.c. (mm) | 400 | ** |
| Fixing distance c.t.c. (mm) | 300* | ** |
* Indication for the fixing distances in urban and rural environments with building heights ≤ 10 m. When Rockpanel is applied in bent or curved conditions on higher buildings or in environments with a higher wind load, please contact Rockpanel.
** For fixing distances of bended A2 boards, please contact Rockpanel.
Note: Rockpanel does not recommend bending boards on an aluminium sub-construction. It is the responsibility of the engineer to decide whether it can be done tension-free with a steel sub-construction.
We manufacture board material mostly used in ventilated constructions, for facade cladding, roof detailing, soffits and fascias.
